A careful rental inspection creates a shared record of the home’s condition before and after your tenancy. This move-in and move-out inspection checklist explains what to photograph, measure, test, and report so you can organize useful evidence, request repairs clearly, and review any security-deposit deductions against documented facts.
Overview
Whether you rent an apartment, house, condo, or room, inspect the property as soon as you receive access and again before returning the keys. The goal is not to find a perfectly new home. It is to distinguish existing conditions from changes that occur during your tenancy.
Use the same basic process at move-in and move-out:
- Walk through every area in good light.
- Take wide photos that show where an issue is located, followed by close-ups that show its detail.
- Record the condition in a written apartment condition report.
- Test fixtures and appliances without creating a safety risk.
- Send repair requests and inspection records through a channel that preserves the date and recipient.
- Keep copies of the lease, messages, receipts, videos, reports, and key-return confirmation.
Before relying on a deadline, notice requirement, or security-deposit rule, check the law and official tenant guidance for the state and local area where the property is located. Lease terms may also specify an inspection form, a move-out appointment, cleaning standards, or a procedure for reporting defects.
What to track
Room-by-room rental move-in inspection checklist
Work in a consistent direction through the property so you do not skip small areas. Mark each item as satisfactory, damaged, dirty, missing, not tested, or repair requested. Describe location and severity rather than writing only “bad” or “fine.”
- Walls and ceilings: Note paint color and condition, nail holes, scuffs, stains, cracks, bubbling, water marks, and loose or damaged trim. Look around vents, windows, and plumbing fixtures for signs of moisture.
- Floors and stairs: Record scratches, dents, stains, worn areas, loose tiles, lifted edges, carpet pulls, and damage to thresholds or railings. Photograph the full floor and each significant mark.
- Doors, windows, and locks: Test opening, closing, latches, screens, blinds, curtains, and locks. Record broken glass, drafts, damaged frames, missing hardware, and keys or access devices provided.
- Kitchen: Inspect cabinets, drawers, counters, sink, faucet, disposal, refrigerator, freezer, range, oven, microwave, dishwasher, and exhaust fan. Note dents, stains, missing shelves, unusual odors, leaks, and whether appliances power on.
- Bathrooms and plumbing: Run faucets briefly, flush toilets, check drains, test the shower, and look beneath sinks for leaks or swelling. Record cracked fixtures, damaged caulk, mildew-like staining, low flow, loose hardware, and water that does not drain normally.
- Electrical and safety equipment: Check accessible light switches, outlets, ceiling fans, heating and cooling controls, smoke alarms, and carbon monoxide alarms. Do not dismantle safety devices. Report missing, damaged, or nonfunctional equipment promptly.
- Pests and cleanliness: Record insects, droppings, nests, odors, excessive dust, residue, damaged screens, or food left in cabinets. Photograph conditions without disturbing possible nests or contaminated material.
- Bedrooms and storage: Inspect closets, shelving, doors, hardware, flooring, and built-in furniture. Check that all promised items are present and in the stated condition.
- Outdoor areas: Document patios, balconies, yards, fences, gates, exterior lights, storage areas, garages, parking spaces, and trash containers. Note existing debris, stains, broken fixtures, or damage to railings and gates.
- Utilities and meters: If you are responsible for utilities, record visible meter readings and the date. Photograph the display clearly and keep confirmation of the account transfer when applicable.
Photo, video, and file-record template
Take photos before unpacking or cleaning whenever possible. Use a wide image to establish the room, a medium image to identify the wall or fixture, and a close-up to show the condition. A slow, continuous video walkthrough can supplement photos, but it should not replace written notes. Narrate the room and date only if the audio is clear; still keep a separate written report.
Use consistent file names such as 2026-11-05_MoveIn_Kitchen_Sink_Leak.jpg or 2026-11-05_MoveOut_Bedroom_NorthWall_Scuff.jpg. Preserve the original files, avoid editing the originals, and back them up in at least one separate location. If your device strips metadata, the file name, written report, and message timestamp provide additional context.
Sample condition report
For each issue, record: date and time; room or exterior area; item; exact condition; photo or video file name; whether it was present at move-in or discovered later; action requested; date reported; and response received. For example: “November 5, 2026, 3:20 p.m.; bathroom under-sink cabinet; bottom panel swollen and discoloration at rear-left corner; files 2026-11-05_MoveIn_Bathroom_Cabinet_01.jpg and 02.jpg; present before occupancy; reported by portal message November 5; awaiting repair response.”
Keep repair requests factual. Explain what you observed, where it is, and whether it affects water, electricity, security, sanitation, or normal use. Avoid making a diagnosis unless a qualified professional has provided one.
Ordinary wear versus potential tenant-caused damage
| Condition | May be consistent with ordinary wear | May require closer review |
|---|---|---|
| Paint and walls | Minor fading, small surface marks, or gradual wear from normal use | Large holes, broken drywall, extensive unauthorized paint, or concentrated impact damage |
| Flooring | Light wear in walking paths or gradual carpet flattening | Deep gouges, burns, major stains, or damage linked to a specific incident |
| Plumbing | Routine aging of fixtures or a maintenance issue reported promptly | Broken fixtures, preventable overflow damage, or an unreported leak that worsened |
| Appliances | Age-related performance decline or normal surface wear | Missing parts, broken doors, misuse-related damage, or damage beyond the recorded move-in condition |
| Cleaning | Normal dust or ordinary turnover cleaning needs | Heavy buildup, abandoned belongings, unusual odors, or waste requiring more than routine cleaning |
This table is a documentation aid, not a legal determination. The lease, evidence, property condition, and applicable state or local rules may all matter.
Cadence and checkpoints
At move-in: Complete the inspection immediately or within the period stated in the lease or local requirements. Send the report and supporting files to the landlord or property manager, ask for written acknowledgment, and retain the sent message. If the home is not ready or a serious safety or habitability concern is present, report it promptly and seek appropriate local guidance.
After repairs: Photograph the repaired area, note the completion date, and keep work-order numbers or messages. If a repair remains incomplete, update the same record rather than starting an unrelated thread.
During the tenancy: Recheck areas after a leak, storm, maintenance visit, pest treatment, or other event that changes the condition. A monthly inspection is usually unnecessary unless the lease, property circumstances, or an active issue makes it useful. For routine household upkeep, pair observations with a broader home maintenance calendar.
Before move-out: Review the move-in report, lease, addenda, and written instructions several weeks before the planned departure. Make a list of cleaning, removal, and repair tasks. Ask whether a pre-move-out walkthrough is available, but do not assume that an informal walkthrough replaces formal notice or documentation.
On move-out day: Remove belongings, complete agreed cleaning, photograph each room in comparable angles, record meters if relevant, and document the condition after the property is empty. Photograph the keys, remotes, parking passes, and other access items before returning them. Keep proof of the return method and date.
How to interpret changes
Compare move-out evidence with the original report, not with memory. Look for differences in location, size, severity, and cause. A mark that appears in both sets of photos was documented at move-in; a newly visible condition should be investigated in context. Consider whether it resulted from normal use, an aging component, a maintenance failure, an accident, an authorized alteration, or a failure to follow the lease.
If a landlord proposes a security-deposit deduction, request an itemized explanation and compare each charge with your report, photographs, messages, and receipts. Keep communication calm and specific: identify the room, date, file name, and point of disagreement. Do not ignore a written notice or deadline. Check the applicable state and local rules for the timing and format of deposit accounting, dispute procedures, and required notices, since these can vary by location and may change.
For a broader moving plan, use the complete moving checklist by week. If you are comparing a new rental, the total move-in cost worksheet can help separate deposits, fees, recurring rent, utilities, and other upfront expenses.
When to revisit
Return to this checklist at five practical checkpoints: when you receive the keys, after a significant repair or property event, before lease renewal, several weeks before move-out, and immediately after returning possession. Revisit your files if the landlord sends a proposed deduction, if a repair dispute develops, or if you discover that a photo or report was not backed up.
Keep a simple recurring reminder to review the lease and local guidance before each move-out cycle. Editors and property managers should refresh references to state and local security-deposit deadlines, documentation requirements, tenant-notice rules, and terminology whenever regulations change. Renters should verify current requirements rather than relying on an old checklist or a previous rental experience.
Next step: Create one folder for the property, add subfolders named “Move-in,” “Repairs,” “Move-out,” and “Deposit,” then complete the first room-by-room walkthrough before unpacking. A clear record made at the beginning is usually easier to use than a reconstruction made after a disagreement.